Sensormatic VM 8 Manuale dell'Operatore Scaricare il pdf (Pagina 71)

5-8 Operator’s Manual

Displaying a Dome's ID Code

The following procedure describes how to display the ID code for the

currently selected dome. The ID code may be useful when diagnosing a

problem.

1. Using the number buttons, enter the number of the dome whose ID code

you want to display (for example, camera 3) and then press

(the

Camera button).

2. Press the Info button on the keypad.

The LCD displays the following prompt:

Cam 3

F 0701-0081-0134

Notice the “F” prefix in front of the ID code; this indicates that it applies

to the dome's Flash PROM.

3. Press the Info button again to display the dome's EEPROM ID code.

Cam 3

E 0701-0079-0310

Notice the “E” prefix in front of the ID code; this indicates that it applies

to the dome's EEPROM.

4. Each time you press the Info button, you alternate between the Flash

PROM and the EEPROM ID codes.

5. Press the Clear button on the keypad.

The T

OUCH TRACKER is again in the camera control mode.

Special Utilities

Although Adjust V-phase, Show Sys Info, and Ping Dome/TTR are

considered to be utility items on the menu, these utilities are reserved for use

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 111 112

Nessun commento

Sensormatic VM 8 Manuale dell'Operatore Pagina 71